Struct bonsaidb::keystorage::s3::aws_sdk_s3::operation::upload_part::builders::UploadPartFluentBuilder

pub struct UploadPartFluentBuilder { /* private fields */ }

Fluent builder constructing a request to UploadPart.

Uploads a part in a multipart upload.

In this operation, you provide part data in your request. However, you have an option to specify your existing Amazon S3 object as a data source for the part you are uploading. To upload a part from an existing object, you use the UploadPartCopy operation.

You must initiate a multipart upload (see CreateMultipartUpload) before you can upload any part. In response to your initiate request, Amazon S3 returns an upload ID, a unique identifier, that you must include in your upload part request.

Part numbers can be any number from 1 to 10,000, inclusive. A part number uniquely identifies a part and also defines its position within the object being created. If you upload a new part using the same part number that was used with a previous part, the previously uploaded part is overwritten.

For information about maximum and minimum part sizes and other multipart upload specifications, see Multipart upload limits in the Amazon S3 User Guide.

To ensure that data is not corrupted when traversing the network, specify the Content-MD5 header in the upload part request. Amazon S3 checks the part data against the provided MD5 value. If they do not match, Amazon S3 returns an error.

If the upload request is signed with Signature Version 4, then Amazon Web Services S3 uses the x-amz-content-sha256 header as a checksum instead of Content-MD5. For more information see Authenticating Requests: Using the Authorization Header (Amazon Web Services Signature Version 4).

Note: After you initiate multipart upload and upload one or more parts, you must either complete or abort multipart upload in order to stop getting charged for storage of the uploaded parts. Only after you either complete or abort multipart upload, Amazon S3 frees up the parts storage and stops charging you for the parts storage.

For more information on multipart uploads, go to Multipart Upload Overview in the Amazon S3 User Guide .

For information on the permissions required to use the multipart upload API, go to Multipart Upload and Permissions in the Amazon S3 User Guide.

Server-side encryption is for data encryption at rest. Amazon S3 encrypts your data as it writes it to disks in its data centers and decrypts it when you access it. You have three mutually exclusive options to protect data using server-side encryption in Amazon S3, depending on how you choose to manage the encryption keys. Specifically, the encryption key options are Amazon S3 managed keys (SSE-S3), Amazon Web Services KMS keys (SSE-KMS), and Customer-Provided Keys (SSE-C). Amazon S3 encrypts data with server-side encryption using Amazon S3 managed keys (SSE-S3) by default. You can optionally tell Amazon S3 to encrypt data at rest using server-side encryption with other key options. The option you use depends on whether you want to use KMS keys (SSE-KMS) or provide your own encryption key (SSE-C). If you choose to provide your own encryption key, the request headers you provide in the request must match the headers you used in the request to initiate the upload by using CreateMultipartUpload. For more information, go to Using Server-Side Encryption in the Amazon S3 User Guide.

Server-side encryption is supported by the S3 Multipart Upload actions. Unless you are using a customer-provided encryption key (SSE-C), you don't need to specify the encryption parameters in each UploadPart request. Instead, you only need to specify the server-side encryption parameters in the initial Initiate Multipart request. For more information, see CreateMultipartUpload.

If you requested server-side encryption using a customer-provided encryption key (SSE-C) in your initiate multipart upload request, you must provide identical encryption information in each part upload using the following headers.

• x-amz-server-side-encryption-customer-algorithm

• x-amz-server-side-encryption-customer-key

• x-amz-server-side-encryption-customer-key-MD5

UploadPart has the following special errors:

• • Code: NoSuchUpload

  • Cause: The specified multipart upload does not exist. The upload ID might be invalid, or the multipart upload might have been aborted or completed.

  • HTTP Status Code: 404 Not Found

  • SOAP Fault Code Prefix: Client

The following operations are related to UploadPart:

• CreateMultipartUpload

• CompleteMultipartUpload

• AbortMultipartUpload

• ListParts

• ListMultipartUploads

Implementations

impl UploadPartFluentBuilder

pub fn as_input(&self) -> &UploadPartInputBuilder

Access the UploadPart as a reference.

pub async fn send( self ) -> impl Future<Output = Result<UploadPartOutput, SdkError<UploadPartError, Response<SdkBody>>>>

Sends the request and returns the response.

If an error occurs, an SdkError will be returned with additional details that can be matched against.

By default, any retryable failures will be retried twice. Retry behavior is configurable with the RetryConfig, which can be set when configuring the client.

pub async fn customize( self ) -> impl Future<Output = Result<CustomizableOperation<UploadPartOutput, UploadPartError, UploadPartFluentBuilder>, SdkError<UploadPartError, Response>>>

Consumes this builder, creating a customizable operation that can be modified before being sent.

pub async fn presigned( self, presigning_config: PresigningConfig ) -> impl Future<Output = Result<PresignedRequest, SdkError<UploadPartError, Response<SdkBody>>>>

Creates a presigned request for this operation.

The presigning_config provides additional presigning-specific config values, such as the amount of time the request should be valid for after creation.

Presigned requests can be given to other users or applications to access a resource or perform an operation without having access to the AWS security credentials.

Important: If you’re using credentials that can expire, such as those from STS AssumeRole or SSO, then the presigned request can only be valid for as long as the credentials used to create it are.

pub fn body(self, input: ByteStream) -> UploadPartFluentBuilder

Object data.

pub fn set_body(self, input: Option<ByteStream>) -> UploadPartFluentBuilder

Object data.

pub fn get_body(&self) -> &Option<ByteStream>

Object data.

pub fn bucket(self, input: impl Into<String>) -> UploadPartFluentBuilder

The name of the bucket to which the multipart upload was initiated.

When using this action with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using access points in the Amazon S3 User Guide.

When you use this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com. When you use this action with S3 on Outposts through the Amazon Web Services SDKs, you provide the Outposts access point ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see What is S3 on Outposts? in the Amazon S3 User Guide.

pub fn set_bucket(self, input: Option<String>) -> UploadPartFluentBuilder

The name of the bucket to which the multipart upload was initiated.

When using this action with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using access points in the Amazon S3 User Guide.

When you use this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com. When you use this action with S3 on Outposts through the Amazon Web Services SDKs, you provide the Outposts access point ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see What is S3 on Outposts? in the Amazon S3 User Guide.

pub fn get_bucket(&self) -> &Option<String>

The name of the bucket to which the multipart upload was initiated.

When using this action with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using access points in the Amazon S3 User Guide.

When you use this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com. When you use this action with S3 on Outposts through the Amazon Web Services SDKs, you provide the Outposts access point ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see What is S3 on Outposts? in the Amazon S3 User Guide.

pub fn content_length(self, input: i64) -> UploadPartFluentBuilder

Size of the body in bytes. This parameter is useful when the size of the body cannot be determined automatically.

pub fn set_content_length(self, input: Option<i64>) -> UploadPartFluentBuilder

Size of the body in bytes. This parameter is useful when the size of the body cannot be determined automatically.

pub fn get_content_length(&self) -> &Option<i64>

Size of the body in bytes. This parameter is useful when the size of the body cannot be determined automatically.

pub fn content_md5(self, input: impl Into<String>) -> UploadPartFluentBuilder

The base64-encoded 128-bit MD5 digest of the part data. This parameter is auto-populated when using the command from the CLI. This parameter is required if object lock parameters are specified.

pub fn set_content_md5(self, input: Option<String>) -> UploadPartFluentBuilder

The base64-encoded 128-bit MD5 digest of the part data. This parameter is auto-populated when using the command from the CLI. This parameter is required if object lock parameters are specified.

pub fn get_content_md5(&self) -> &Option<String>

The base64-encoded 128-bit MD5 digest of the part data. This parameter is auto-populated when using the command from the CLI. This parameter is required if object lock parameters are specified.

pub fn checksum_algorithm( self, input: ChecksumAlgorithm ) -> UploadPartFluentBuilder

Indicates the algorithm used to create the checksum for the object when using the SDK. This header will not provide any additional functionality if not using the SDK. When sending this header, there must be a corresponding x-amz-checksum or x-amz-trailer header sent. Otherwise, Amazon S3 fails the request with the HTTP status code 400 Bad Request. For more information, see Checking object integrity in the Amazon S3 User Guide.

If you provide an individual checksum, Amazon S3 ignores any provided ChecksumAlgorithm parameter.

This checksum algorithm must be the same for all parts and it match the checksum value supplied in the CreateMultipartUpload request.

pub fn set_checksum_algorithm( self, input: Option<ChecksumAlgorithm> ) -> UploadPartFluentBuilder

Indicates the algorithm used to create the checksum for the object when using the SDK. This header will not provide any additional functionality if not using the SDK. When sending this header, there must be a corresponding x-amz-checksum or x-amz-trailer header sent. Otherwise, Amazon S3 fails the request with the HTTP status code 400 Bad Request. For more information, see Checking object integrity in the Amazon S3 User Guide.

If you provide an individual checksum, Amazon S3 ignores any provided ChecksumAlgorithm parameter.

This checksum algorithm must be the same for all parts and it match the checksum value supplied in the CreateMultipartUpload request.

pub fn get_checksum_algorithm(&self) -> &Option<ChecksumAlgorithm>

Indicates the algorithm used to create the checksum for the object when using the SDK. This header will not provide any additional functionality if not using the SDK. When sending this header, there must be a corresponding x-amz-checksum or x-amz-trailer header sent. Otherwise, Amazon S3 fails the request with the HTTP status code 400 Bad Request. For more information, see Checking object integrity in the Amazon S3 User Guide.

If you provide an individual checksum, Amazon S3 ignores any provided ChecksumAlgorithm parameter.

This checksum algorithm must be the same for all parts and it match the checksum value supplied in the CreateMultipartUpload request.

pub fn checksum_crc32(self, input: impl Into<String>) -> UploadPartFluentBuilder

This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 32-bit CRC32 checksum of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.

pub fn set_checksum_crc32( self, input: Option<String> ) -> UploadPartFluentBuilder

This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 32-bit CRC32 checksum of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.

pub fn get_checksum_crc32(&self) -> &Option<String>

This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 32-bit CRC32 checksum of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.

pub fn checksum_crc32_c( self, input: impl Into<String> ) -> UploadPartFluentBuilder

This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 32-bit CRC32C checksum of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.

pub fn set_checksum_crc32_c( self, input: Option<String> ) -> UploadPartFluentBuilder

This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 32-bit CRC32C checksum of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.

pub fn get_checksum_crc32_c(&self) -> &Option<String>

This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 32-bit CRC32C checksum of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.

pub fn checksum_sha1(self, input: impl Into<String>) -> UploadPartFluentBuilder

This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 160-bit SHA-1 digest of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.

pub fn set_checksum_sha1(self, input: Option<String>) -> UploadPartFluentBuilder

This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 160-bit SHA-1 digest of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.

pub fn get_checksum_sha1(&self) -> &Option<String>

This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 160-bit SHA-1 digest of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.

pub fn checksum_sha256( self, input: impl Into<String> ) -> UploadPartFluentBuilder

This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 256-bit SHA-256 digest of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.

pub fn set_checksum_sha256( self, input: Option<String> ) -> UploadPartFluentBuilder

This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 256-bit SHA-256 digest of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.

pub fn get_checksum_sha256(&self) -> &Option<String>

This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 256-bit SHA-256 digest of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.

pub fn key(self, input: impl Into<String>) -> UploadPartFluentBuilder

Object key for which the multipart upload was initiated.

pub fn set_key(self, input: Option<String>) -> UploadPartFluentBuilder

Object key for which the multipart upload was initiated.

pub fn get_key(&self) -> &Option<String>

Object key for which the multipart upload was initiated.

pub fn part_number(self, input: i32) -> UploadPartFluentBuilder

Part number of part being uploaded. This is a positive integer between 1 and 10,000.

pub fn set_part_number(self, input: Option<i32>) -> UploadPartFluentBuilder

Part number of part being uploaded. This is a positive integer between 1 and 10,000.

pub fn get_part_number(&self) -> &Option<i32>

Part number of part being uploaded. This is a positive integer between 1 and 10,000.

pub fn upload_id(self, input: impl Into<String>) -> UploadPartFluentBuilder

Upload ID identifying the multipart upload whose part is being uploaded.

pub fn set_upload_id(self, input: Option<String>) -> UploadPartFluentBuilder

Upload ID identifying the multipart upload whose part is being uploaded.

pub fn get_upload_id(&self) -> &Option<String>

Upload ID identifying the multipart upload whose part is being uploaded.

pub fn sse_customer_algorithm( self, input: impl Into<String> ) -> UploadPartFluentBuilder

Specifies the algorithm to use to when encrypting the object (for example, AES256).

pub fn set_sse_customer_algorithm( self, input: Option<String> ) -> UploadPartFluentBuilder

Specifies the algorithm to use to when encrypting the object (for example, AES256).

pub fn get_sse_customer_algorithm(&self) -> &Option<String>

Specifies the algorithm to use to when encrypting the object (for example, AES256).

pub fn sse_customer_key( self, input: impl Into<String> ) -> UploadPartFluentBuilder

Specifies the customer-provided encryption key for Amazon S3 to use in encrypting data. This value is used to store the object and then it is discarded; Amazon S3 does not store the encryption key. The key must be appropriate for use with the algorithm specified in the x-amz-server-side-encryption-customer-algorithm header. This must be the same encryption key specified in the initiate multipart upload request.

pub fn set_sse_customer_key( self, input: Option<String> ) -> UploadPartFluentBuilder

Specifies the customer-provided encryption key for Amazon S3 to use in encrypting data. This value is used to store the object and then it is discarded; Amazon S3 does not store the encryption key. The key must be appropriate for use with the algorithm specified in the x-amz-server-side-encryption-customer-algorithm header. This must be the same encryption key specified in the initiate multipart upload request.

pub fn get_sse_customer_key(&self) -> &Option<String>

Specifies the customer-provided encryption key for Amazon S3 to use in encrypting data. This value is used to store the object and then it is discarded; Amazon S3 does not store the encryption key. The key must be appropriate for use with the algorithm specified in the x-amz-server-side-encryption-customer-algorithm header. This must be the same encryption key specified in the initiate multipart upload request.

pub fn sse_customer_key_md5( self, input: impl Into<String> ) -> UploadPartFluentBuilder

Specifies the 128-bit MD5 digest of the encryption key according to RFC 1321. Amazon S3 uses this header for a message integrity check to ensure that the encryption key was transmitted without error.

pub fn set_sse_customer_key_md5( self, input: Option<String> ) -> UploadPartFluentBuilder

Specifies the 128-bit MD5 digest of the encryption key according to RFC 1321. Amazon S3 uses this header for a message integrity check to ensure that the encryption key was transmitted without error.

pub fn get_sse_customer_key_md5(&self) -> &Option<String>

Specifies the 128-bit MD5 digest of the encryption key according to RFC 1321. Amazon S3 uses this header for a message integrity check to ensure that the encryption key was transmitted without error.

pub fn request_payer(self, input: RequestPayer) -> UploadPartFluentBuilder

Confirms that the requester knows that they will be charged for the request. Bucket owners need not specify this parameter in their requests. If either the source or destination Amazon S3 bucket has Requester Pays enabled, the requester will pay for corresponding charges to copy the object. For information about downloading objects from Requester Pays buckets, see Downloading Objects in Requester Pays Buckets in the Amazon S3 User Guide.

pub fn set_request_payer( self, input: Option<RequestPayer> ) -> UploadPartFluentBuilder

Confirms that the requester knows that they will be charged for the request. Bucket owners need not specify this parameter in their requests. If either the source or destination Amazon S3 bucket has Requester Pays enabled, the requester will pay for corresponding charges to copy the object. For information about downloading objects from Requester Pays buckets, see Downloading Objects in Requester Pays Buckets in the Amazon S3 User Guide.

pub fn get_request_payer(&self) -> &Option<RequestPayer>

Confirms that the requester knows that they will be charged for the request. Bucket owners need not specify this parameter in their requests. If either the source or destination Amazon S3 bucket has Requester Pays enabled, the requester will pay for corresponding charges to copy the object. For information about downloading objects from Requester Pays buckets, see Downloading Objects in Requester Pays Buckets in the Amazon S3 User Guide.

pub fn expected_bucket_owner( self, input: impl Into<String> ) -> UploadPartFluentBuilder

The account ID of the expected bucket owner. If the bucket is owned by a different account, the request fails with the HTTP status code 403 Forbidden (access denied).

pub fn set_expected_bucket_owner( self, input: Option<String> ) -> UploadPartFluentBuilder

The account ID of the expected bucket owner. If the bucket is owned by a different account, the request fails with the HTTP status code 403 Forbidden (access denied).

pub fn get_expected_bucket_owner(&self) -> &Option<String>

The account ID of the expected bucket owner. If the bucket is owned by a different account, the request fails with the HTTP status code 403 Forbidden (access denied).

Trait Implementations

impl Debug for UploadPartFluentBuilder

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.