Struct bonsaidb::keystorage::s3::aws_sdk_s3::operation::put_object_acl::PutObjectAclInput

pub struct PutObjectAclInput {

    pub acl: Option<ObjectCannedAcl>,
    pub access_control_policy: Option<AccessControlPolicy>,
    pub bucket: Option<String>,
    pub content_md5: Option<String>,
    pub checksum_algorithm: Option<ChecksumAlgorithm>,
    pub grant_full_control: Option<String>,
    pub grant_read: Option<String>,
    pub grant_read_acp: Option<String>,
    pub grant_write: Option<String>,
    pub grant_write_acp: Option<String>,
    pub key: Option<String>,
    pub request_payer: Option<RequestPayer>,
    pub version_id: Option<String>,
    pub expected_bucket_owner: Option<String>,
}

Fields (Non-exhaustive)

Non-exhaustive structs could have additional fields added in future. Therefore, non-exhaustive structs cannot be constructed in external crates using the traditional Struct { .. } syntax; cannot be matched against without a wildcard ..; and struct update syntax will not work.

acl: Option<ObjectCannedAcl>

The canned ACL to apply to the object. For more information, see Canned ACL.

access_control_policy: Option<AccessControlPolicy>

Contains the elements that set the ACL permissions for an object per grantee.

bucket: Option<String>

The bucket name that contains the object to which you want to attach the ACL.

When using this action with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using access points in the Amazon S3 User Guide.

content_md5: Option<String>

The base64-encoded 128-bit MD5 digest of the data. This header must be used as a message integrity check to verify that the request body was not corrupted in transit. For more information, go to RFC 1864.>

For requests made using the Amazon Web Services Command Line Interface (CLI) or Amazon Web Services SDKs, this field is calculated automatically.

checksum_algorithm: Option<ChecksumAlgorithm>

Indicates the algorithm used to create the checksum for the object when using the SDK. This header will not provide any additional functionality if not using the SDK. When sending this header, there must be a corresponding x-amz-checksum or x-amz-trailer header sent. Otherwise, Amazon S3 fails the request with the HTTP status code 400 Bad Request. For more information, see Checking object integrity in the Amazon S3 User Guide.

If you provide an individual checksum, Amazon S3 ignores any provided ChecksumAlgorithm parameter.

grant_full_control: Option<String>

Allows grantee the read, write, read ACP, and write ACP permissions on the bucket.

This action is not supported by Amazon S3 on Outposts.

grant_read: Option<String>

Allows grantee to list the objects in the bucket.

This action is not supported by Amazon S3 on Outposts.

grant_read_acp: Option<String>

Allows grantee to read the bucket ACL.

This action is not supported by Amazon S3 on Outposts.

grant_write: Option<String>

Allows grantee to create new objects in the bucket.

For the bucket and object owners of existing objects, also allows deletions and overwrites of those objects.

grant_write_acp: Option<String>

Allows grantee to write the ACL for the applicable bucket.

This action is not supported by Amazon S3 on Outposts.

key: Option<String>

Key for which the PUT action was initiated.

When using this action with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using access points in the Amazon S3 User Guide.

When you use this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com. When you use this action with S3 on Outposts through the Amazon Web Services SDKs, you provide the Outposts access point ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see What is S3 on Outposts? in the Amazon S3 User Guide.

request_payer: Option<RequestPayer>

Confirms that the requester knows that they will be charged for the request. Bucket owners need not specify this parameter in their requests. If either the source or destination Amazon S3 bucket has Requester Pays enabled, the requester will pay for corresponding charges to copy the object. For information about downloading objects from Requester Pays buckets, see Downloading Objects in Requester Pays Buckets in the Amazon S3 User Guide.

version_id: Option<String>

VersionId used to reference a specific version of the object.

expected_bucket_owner: Option<String>

The account ID of the expected bucket owner. If the bucket is owned by a different account, the request fails with the HTTP status code 403 Forbidden (access denied).

Implementations

impl PutObjectAclInput

pub fn acl(&self) -> Option<&ObjectCannedAcl>

The canned ACL to apply to the object. For more information, see Canned ACL.

pub fn access_control_policy(&self) -> Option<&AccessControlPolicy>

Contains the elements that set the ACL permissions for an object per grantee.

pub fn bucket(&self) -> Option<&str>

The bucket name that contains the object to which you want to attach the ACL.

When using this action with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using access points in the Amazon S3 User Guide.

pub fn content_md5(&self) -> Option<&str>

The base64-encoded 128-bit MD5 digest of the data. This header must be used as a message integrity check to verify that the request body was not corrupted in transit. For more information, go to RFC 1864.>

For requests made using the Amazon Web Services Command Line Interface (CLI) or Amazon Web Services SDKs, this field is calculated automatically.

pub fn checksum_algorithm(&self) -> Option<&ChecksumAlgorithm>

Indicates the algorithm used to create the checksum for the object when using the SDK. This header will not provide any additional functionality if not using the SDK. When sending this header, there must be a corresponding x-amz-checksum or x-amz-trailer header sent. Otherwise, Amazon S3 fails the request with the HTTP status code 400 Bad Request. For more information, see Checking object integrity in the Amazon S3 User Guide.

If you provide an individual checksum, Amazon S3 ignores any provided ChecksumAlgorithm parameter.

pub fn grant_full_control(&self) -> Option<&str>

Allows grantee the read, write, read ACP, and write ACP permissions on the bucket.

This action is not supported by Amazon S3 on Outposts.

pub fn grant_read(&self) -> Option<&str>

Allows grantee to list the objects in the bucket.

This action is not supported by Amazon S3 on Outposts.

pub fn grant_read_acp(&self) -> Option<&str>

Allows grantee to read the bucket ACL.

This action is not supported by Amazon S3 on Outposts.

pub fn grant_write(&self) -> Option<&str>

Allows grantee to create new objects in the bucket.

For the bucket and object owners of existing objects, also allows deletions and overwrites of those objects.

pub fn grant_write_acp(&self) -> Option<&str>

Allows grantee to write the ACL for the applicable bucket.

This action is not supported by Amazon S3 on Outposts.

pub fn key(&self) -> Option<&str>

Key for which the PUT action was initiated.

When using this action with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using access points in the Amazon S3 User Guide.

When you use this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com. When you use this action with S3 on Outposts through the Amazon Web Services SDKs, you provide the Outposts access point ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see What is S3 on Outposts? in the Amazon S3 User Guide.

pub fn request_payer(&self) -> Option<&RequestPayer>

Confirms that the requester knows that they will be charged for the request. Bucket owners need not specify this parameter in their requests. If either the source or destination Amazon S3 bucket has Requester Pays enabled, the requester will pay for corresponding charges to copy the object. For information about downloading objects from Requester Pays buckets, see Downloading Objects in Requester Pays Buckets in the Amazon S3 User Guide.

pub fn version_id(&self) -> Option<&str>

VersionId used to reference a specific version of the object.

pub fn expected_bucket_owner(&self) -> Option<&str>

The account ID of the expected bucket owner. If the bucket is owned by a different account, the request fails with the HTTP status code 403 Forbidden (access denied).

impl PutObjectAclInput

pub fn builder() -> PutObjectAclInputBuilder

Creates a new builder-style object to manufacture PutObjectAclInput.

Trait Implementations

impl Clone for PutObjectAclInput

fn clone(&self) -> PutObjectAclInput

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for PutObjectAclInput

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl PartialEq<PutObjectAclInput> for PutObjectAclInput

fn eq(&self, other: &PutObjectAclInput) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl StructuralPartialEq for PutObjectAclInput