Struct bonsaidb::keystorage::s3::aws_sdk_s3::operation::complete_multipart_upload::builders::CompleteMultipartUploadOutputBuilder

pub struct CompleteMultipartUploadOutputBuilder { /* private fields */ }

A builder for CompleteMultipartUploadOutput.

Implementations

impl CompleteMultipartUploadOutputBuilder

pub fn location( self, input: impl Into<String> ) -> CompleteMultipartUploadOutputBuilder

The URI that identifies the newly created object.

pub fn set_location( self, input: Option<String> ) -> CompleteMultipartUploadOutputBuilder

The URI that identifies the newly created object.

pub fn get_location(&self) -> &Option<String>

The URI that identifies the newly created object.

pub fn bucket( self, input: impl Into<String> ) -> CompleteMultipartUploadOutputBuilder

The name of the bucket that contains the newly created object. Does not return the access point ARN or access point alias if used.

When using this action with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using access points in the Amazon S3 User Guide.

When you use this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com. When you use this action with S3 on Outposts through the Amazon Web Services SDKs, you provide the Outposts access point ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see What is S3 on Outposts? in the Amazon S3 User Guide.

pub fn set_bucket( self, input: Option<String> ) -> CompleteMultipartUploadOutputBuilder

The name of the bucket that contains the newly created object. Does not return the access point ARN or access point alias if used.

When using this action with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using access points in the Amazon S3 User Guide.

When you use this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com. When you use this action with S3 on Outposts through the Amazon Web Services SDKs, you provide the Outposts access point ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see What is S3 on Outposts? in the Amazon S3 User Guide.

pub fn get_bucket(&self) -> &Option<String>

The name of the bucket that contains the newly created object. Does not return the access point ARN or access point alias if used.

When using this action with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using access points in the Amazon S3 User Guide.

When you use this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com. When you use this action with S3 on Outposts through the Amazon Web Services SDKs, you provide the Outposts access point ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see What is S3 on Outposts? in the Amazon S3 User Guide.

pub fn key( self, input: impl Into<String> ) -> CompleteMultipartUploadOutputBuilder

The object key of the newly created object.

pub fn set_key( self, input: Option<String> ) -> CompleteMultipartUploadOutputBuilder

The object key of the newly created object.

pub fn get_key(&self) -> &Option<String>

The object key of the newly created object.

pub fn expiration( self, input: impl Into<String> ) -> CompleteMultipartUploadOutputBuilder

If the object expiration is configured, this will contain the expiration date (expiry-date) and rule ID (rule-id). The value of rule-id is URL-encoded.

pub fn set_expiration( self, input: Option<String> ) -> CompleteMultipartUploadOutputBuilder

If the object expiration is configured, this will contain the expiration date (expiry-date) and rule ID (rule-id). The value of rule-id is URL-encoded.

pub fn get_expiration(&self) -> &Option<String>

If the object expiration is configured, this will contain the expiration date (expiry-date) and rule ID (rule-id). The value of rule-id is URL-encoded.

pub fn e_tag( self, input: impl Into<String> ) -> CompleteMultipartUploadOutputBuilder

Entity tag that identifies the newly created object's data. Objects with different object data will have different entity tags. The entity tag is an opaque string. The entity tag may or may not be an MD5 digest of the object data. If the entity tag is not an MD5 digest of the object data, it will contain one or more nonhexadecimal characters and/or will consist of less than 32 or more than 32 hexadecimal digits. For more information about how the entity tag is calculated, see Checking object integrity in the Amazon S3 User Guide.

pub fn set_e_tag( self, input: Option<String> ) -> CompleteMultipartUploadOutputBuilder

Entity tag that identifies the newly created object's data. Objects with different object data will have different entity tags. The entity tag is an opaque string. The entity tag may or may not be an MD5 digest of the object data. If the entity tag is not an MD5 digest of the object data, it will contain one or more nonhexadecimal characters and/or will consist of less than 32 or more than 32 hexadecimal digits. For more information about how the entity tag is calculated, see Checking object integrity in the Amazon S3 User Guide.

pub fn get_e_tag(&self) -> &Option<String>

Entity tag that identifies the newly created object's data. Objects with different object data will have different entity tags. The entity tag is an opaque string. The entity tag may or may not be an MD5 digest of the object data. If the entity tag is not an MD5 digest of the object data, it will contain one or more nonhexadecimal characters and/or will consist of less than 32 or more than 32 hexadecimal digits. For more information about how the entity tag is calculated, see Checking object integrity in the Amazon S3 User Guide.

pub fn checksum_crc32( self, input: impl Into<String> ) -> CompleteMultipartUploadOutputBuilder

The base64-encoded, 32-bit CRC32 checksum of the object. This will only be present if it was uploaded with the object. With multipart uploads, this may not be a checksum value of the object. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide.

pub fn set_checksum_crc32( self, input: Option<String> ) -> CompleteMultipartUploadOutputBuilder

The base64-encoded, 32-bit CRC32 checksum of the object. This will only be present if it was uploaded with the object. With multipart uploads, this may not be a checksum value of the object. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide.

pub fn get_checksum_crc32(&self) -> &Option<String>

The base64-encoded, 32-bit CRC32 checksum of the object. This will only be present if it was uploaded with the object. With multipart uploads, this may not be a checksum value of the object. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide.

pub fn checksum_crc32_c( self, input: impl Into<String> ) -> CompleteMultipartUploadOutputBuilder

The base64-encoded, 32-bit CRC32C checksum of the object. This will only be present if it was uploaded with the object. With multipart uploads, this may not be a checksum value of the object. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide.

pub fn set_checksum_crc32_c( self, input: Option<String> ) -> CompleteMultipartUploadOutputBuilder

The base64-encoded, 32-bit CRC32C checksum of the object. This will only be present if it was uploaded with the object. With multipart uploads, this may not be a checksum value of the object. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide.

pub fn get_checksum_crc32_c(&self) -> &Option<String>

The base64-encoded, 32-bit CRC32C checksum of the object. This will only be present if it was uploaded with the object. With multipart uploads, this may not be a checksum value of the object. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide.

pub fn checksum_sha1( self, input: impl Into<String> ) -> CompleteMultipartUploadOutputBuilder

The base64-encoded, 160-bit SHA-1 digest of the object. This will only be present if it was uploaded with the object. With multipart uploads, this may not be a checksum value of the object. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide.

pub fn set_checksum_sha1( self, input: Option<String> ) -> CompleteMultipartUploadOutputBuilder

The base64-encoded, 160-bit SHA-1 digest of the object. This will only be present if it was uploaded with the object. With multipart uploads, this may not be a checksum value of the object. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide.

pub fn get_checksum_sha1(&self) -> &Option<String>

The base64-encoded, 160-bit SHA-1 digest of the object. This will only be present if it was uploaded with the object. With multipart uploads, this may not be a checksum value of the object. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide.

pub fn checksum_sha256( self, input: impl Into<String> ) -> CompleteMultipartUploadOutputBuilder

The base64-encoded, 256-bit SHA-256 digest of the object. This will only be present if it was uploaded with the object. With multipart uploads, this may not be a checksum value of the object. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide.

pub fn set_checksum_sha256( self, input: Option<String> ) -> CompleteMultipartUploadOutputBuilder

The base64-encoded, 256-bit SHA-256 digest of the object. This will only be present if it was uploaded with the object. With multipart uploads, this may not be a checksum value of the object. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide.

pub fn get_checksum_sha256(&self) -> &Option<String>

The base64-encoded, 256-bit SHA-256 digest of the object. This will only be present if it was uploaded with the object. With multipart uploads, this may not be a checksum value of the object. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide.

pub fn server_side_encryption( self, input: ServerSideEncryption ) -> CompleteMultipartUploadOutputBuilder

The server-side encryption algorithm used when storing this object in Amazon S3 (for example, AES256, aws:kms).

pub fn set_server_side_encryption( self, input: Option<ServerSideEncryption> ) -> CompleteMultipartUploadOutputBuilder

The server-side encryption algorithm used when storing this object in Amazon S3 (for example, AES256, aws:kms).

pub fn get_server_side_encryption(&self) -> &Option<ServerSideEncryption>

The server-side encryption algorithm used when storing this object in Amazon S3 (for example, AES256, aws:kms).

pub fn version_id( self, input: impl Into<String> ) -> CompleteMultipartUploadOutputBuilder

Version ID of the newly created object, in case the bucket has versioning turned on.

pub fn set_version_id( self, input: Option<String> ) -> CompleteMultipartUploadOutputBuilder

Version ID of the newly created object, in case the bucket has versioning turned on.

pub fn get_version_id(&self) -> &Option<String>

Version ID of the newly created object, in case the bucket has versioning turned on.

pub fn ssekms_key_id( self, input: impl Into<String> ) -> CompleteMultipartUploadOutputBuilder

If present, specifies the ID of the Key Management Service (KMS) symmetric encryption customer managed key that was used for the object.

pub fn set_ssekms_key_id( self, input: Option<String> ) -> CompleteMultipartUploadOutputBuilder

If present, specifies the ID of the Key Management Service (KMS) symmetric encryption customer managed key that was used for the object.

pub fn get_ssekms_key_id(&self) -> &Option<String>

If present, specifies the ID of the Key Management Service (KMS) symmetric encryption customer managed key that was used for the object.

pub fn bucket_key_enabled( self, input: bool ) -> CompleteMultipartUploadOutputBuilder

Indicates whether the multipart upload uses an S3 Bucket Key for server-side encryption with Key Management Service (KMS) keys (SSE-KMS).

pub fn set_bucket_key_enabled( self, input: Option<bool> ) -> CompleteMultipartUploadOutputBuilder

Indicates whether the multipart upload uses an S3 Bucket Key for server-side encryption with Key Management Service (KMS) keys (SSE-KMS).

pub fn get_bucket_key_enabled(&self) -> &Option<bool>

Indicates whether the multipart upload uses an S3 Bucket Key for server-side encryption with Key Management Service (KMS) keys (SSE-KMS).

pub fn request_charged( self, input: RequestCharged ) -> CompleteMultipartUploadOutputBuilder

If present, indicates that the requester was successfully charged for the request.

pub fn set_request_charged( self, input: Option<RequestCharged> ) -> CompleteMultipartUploadOutputBuilder

If present, indicates that the requester was successfully charged for the request.

pub fn get_request_charged(&self) -> &Option<RequestCharged>

If present, indicates that the requester was successfully charged for the request.

pub fn build(self) -> CompleteMultipartUploadOutput

Consumes the builder and constructs a CompleteMultipartUploadOutput.

Trait Implementations

impl Clone for CompleteMultipartUploadOutputBuilder

fn clone(&self) -> CompleteMultipartUploadOutputBuilder

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for CompleteMultipartUploadOutputBuilder

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl Default for CompleteMultipartUploadOutputBuilder

fn default() -> CompleteMultipartUploadOutputBuilder

Returns the “default value” for a type.

impl PartialEq<CompleteMultipartUploadOutputBuilder> for CompleteMultipartUploadOutputBuilder

fn eq(&self, other: &CompleteMultipartUploadOutputBuilder) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl StructuralPartialEq for CompleteMultipartUploadOutputBuilder