#[non_exhaustive]
pub struct UploadPartOutputBuilder { /* private fields */ }
Expand description

A builder for UploadPartOutput.

Implementations§

§

impl UploadPartOutputBuilder

pub fn server_side_encryption( self, input: ServerSideEncryption ) -> UploadPartOutputBuilder

The server-side encryption algorithm used when storing this object in Amazon S3 (for example, AES256, aws:kms).

pub fn set_server_side_encryption( self, input: Option<ServerSideEncryption> ) -> UploadPartOutputBuilder

The server-side encryption algorithm used when storing this object in Amazon S3 (for example, AES256, aws:kms).

pub fn get_server_side_encryption(&self) -> &Option<ServerSideEncryption>

The server-side encryption algorithm used when storing this object in Amazon S3 (for example, AES256, aws:kms).

pub fn e_tag(self, input: impl Into<String>) -> UploadPartOutputBuilder

Entity tag for the uploaded object.

pub fn set_e_tag(self, input: Option<String>) -> UploadPartOutputBuilder

Entity tag for the uploaded object.

pub fn get_e_tag(&self) -> &Option<String>

Entity tag for the uploaded object.

pub fn checksum_crc32(self, input: impl Into<String>) -> UploadPartOutputBuilder

The base64-encoded, 32-bit CRC32 checksum of the object. This will only be present if it was uploaded with the object. With multipart uploads, this may not be a checksum value of the object. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide.

pub fn set_checksum_crc32( self, input: Option<String> ) -> UploadPartOutputBuilder

The base64-encoded, 32-bit CRC32 checksum of the object. This will only be present if it was uploaded with the object. With multipart uploads, this may not be a checksum value of the object. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide.

pub fn get_checksum_crc32(&self) -> &Option<String>

The base64-encoded, 32-bit CRC32 checksum of the object. This will only be present if it was uploaded with the object. With multipart uploads, this may not be a checksum value of the object. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide.

pub fn checksum_crc32_c( self, input: impl Into<String> ) -> UploadPartOutputBuilder

The base64-encoded, 32-bit CRC32C checksum of the object. This will only be present if it was uploaded with the object. With multipart uploads, this may not be a checksum value of the object. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide.

pub fn set_checksum_crc32_c( self, input: Option<String> ) -> UploadPartOutputBuilder

The base64-encoded, 32-bit CRC32C checksum of the object. This will only be present if it was uploaded with the object. With multipart uploads, this may not be a checksum value of the object. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide.

pub fn get_checksum_crc32_c(&self) -> &Option<String>

The base64-encoded, 32-bit CRC32C checksum of the object. This will only be present if it was uploaded with the object. With multipart uploads, this may not be a checksum value of the object. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide.

pub fn checksum_sha1(self, input: impl Into<String>) -> UploadPartOutputBuilder

The base64-encoded, 160-bit SHA-1 digest of the object. This will only be present if it was uploaded with the object. With multipart uploads, this may not be a checksum value of the object. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide.

pub fn set_checksum_sha1(self, input: Option<String>) -> UploadPartOutputBuilder

The base64-encoded, 160-bit SHA-1 digest of the object. This will only be present if it was uploaded with the object. With multipart uploads, this may not be a checksum value of the object. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide.

pub fn get_checksum_sha1(&self) -> &Option<String>

The base64-encoded, 160-bit SHA-1 digest of the object. This will only be present if it was uploaded with the object. With multipart uploads, this may not be a checksum value of the object. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide.

pub fn checksum_sha256( self, input: impl Into<String> ) -> UploadPartOutputBuilder

The base64-encoded, 256-bit SHA-256 digest of the object. This will only be present if it was uploaded with the object. With multipart uploads, this may not be a checksum value of the object. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide.

pub fn set_checksum_sha256( self, input: Option<String> ) -> UploadPartOutputBuilder

The base64-encoded, 256-bit SHA-256 digest of the object. This will only be present if it was uploaded with the object. With multipart uploads, this may not be a checksum value of the object. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide.

pub fn get_checksum_sha256(&self) -> &Option<String>

The base64-encoded, 256-bit SHA-256 digest of the object. This will only be present if it was uploaded with the object. With multipart uploads, this may not be a checksum value of the object. For more information about how checksums are calculated with multipart uploads, see Checking object integrity in the Amazon S3 User Guide.

pub fn sse_customer_algorithm( self, input: impl Into<String> ) -> UploadPartOutputBuilder

If server-side encryption with a customer-provided encryption key was requested, the response will include this header confirming the encryption algorithm used.

pub fn set_sse_customer_algorithm( self, input: Option<String> ) -> UploadPartOutputBuilder

If server-side encryption with a customer-provided encryption key was requested, the response will include this header confirming the encryption algorithm used.

pub fn get_sse_customer_algorithm(&self) -> &Option<String>

If server-side encryption with a customer-provided encryption key was requested, the response will include this header confirming the encryption algorithm used.

pub fn sse_customer_key_md5( self, input: impl Into<String> ) -> UploadPartOutputBuilder

If server-side encryption with a customer-provided encryption key was requested, the response will include this header to provide round-trip message integrity verification of the customer-provided encryption key.

pub fn set_sse_customer_key_md5( self, input: Option<String> ) -> UploadPartOutputBuilder

If server-side encryption with a customer-provided encryption key was requested, the response will include this header to provide round-trip message integrity verification of the customer-provided encryption key.

pub fn get_sse_customer_key_md5(&self) -> &Option<String>

If server-side encryption with a customer-provided encryption key was requested, the response will include this header to provide round-trip message integrity verification of the customer-provided encryption key.

pub fn ssekms_key_id(self, input: impl Into<String>) -> UploadPartOutputBuilder

If present, specifies the ID of the Key Management Service (KMS) symmetric encryption customer managed key was used for the object.

pub fn set_ssekms_key_id(self, input: Option<String>) -> UploadPartOutputBuilder

If present, specifies the ID of the Key Management Service (KMS) symmetric encryption customer managed key was used for the object.

pub fn get_ssekms_key_id(&self) -> &Option<String>

If present, specifies the ID of the Key Management Service (KMS) symmetric encryption customer managed key was used for the object.

pub fn bucket_key_enabled(self, input: bool) -> UploadPartOutputBuilder

Indicates whether the multipart upload uses an S3 Bucket Key for server-side encryption with Key Management Service (KMS) keys (SSE-KMS).

pub fn set_bucket_key_enabled( self, input: Option<bool> ) -> UploadPartOutputBuilder

Indicates whether the multipart upload uses an S3 Bucket Key for server-side encryption with Key Management Service (KMS) keys (SSE-KMS).

pub fn get_bucket_key_enabled(&self) -> &Option<bool>

Indicates whether the multipart upload uses an S3 Bucket Key for server-side encryption with Key Management Service (KMS) keys (SSE-KMS).

pub fn request_charged(self, input: RequestCharged) -> UploadPartOutputBuilder

If present, indicates that the requester was successfully charged for the request.

pub fn set_request_charged( self, input: Option<RequestCharged> ) -> UploadPartOutputBuilder

If present, indicates that the requester was successfully charged for the request.

pub fn get_request_charged(&self) -> &Option<RequestCharged>

If present, indicates that the requester was successfully charged for the request.

pub fn build(self) -> UploadPartOutput

Consumes the builder and constructs a UploadPartOutput.

Trait Implementations§

§

impl Clone for UploadPartOutputBuilder

§

fn clone(&self) -> UploadPartOutputBuilder

Returns a copy of the value. Read more
1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
§

impl Debug for UploadPartOutputBuilder

§

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter. Read more
§

impl Default for UploadPartOutputBuilder

§

fn default() -> UploadPartOutputBuilder

Returns the “default value” for a type. Read more
§

impl PartialEq for UploadPartOutputBuilder

§

fn eq(&self, other: &UploadPartOutputBuilder) -> bool

This method tests for self and other values to be equal, and is used by ==.
1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
§

impl StructuralPartialEq for UploadPartOutputBuilder

Auto Trait Implementations§

Blanket Implementations§

source§

impl<T> Any for T
where T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
§

impl<'a, T, E> AsTaggedExplicit<'a, E> for T
where T: 'a,

§

fn explicit(self, class: Class, tag: u32) -> TaggedParser<'a, Explicit, Self, E>

§

impl<'a, T, E> AsTaggedImplicit<'a, E> for T
where T: 'a,

§

fn implicit( self, class: Class, constructed: bool, tag: u32 ) -> TaggedParser<'a, Implicit, Self, E>

source§

impl<T> Borrow<T> for T
where T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

§

impl<T> Instrument for T

§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided [Span], returning an Instrumented wrapper. Read more
§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
source§

impl<T, U> Into<U> for T
where U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T> Same for T

§

type Output = T

Should always be Self
source§

impl<T> ToOwned for T
where T: Clone,

§

type Owned = T

The resulting type after obtaining ownership.
source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
§

impl<V, T> VZip<V> for T
where V: MultiLane<T>,

§

fn vzip(self) -> V

§

impl<T> WithSubscriber for T

§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a [WithDispatch] wrapper. Read more
§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a [WithDispatch] wrapper. Read more