Struct bonsaidb::keystorage::s3::aws_sdk_s3::operation::upload_part::builders::UploadPartInputBuilder

#[non_exhaustive]
pub struct UploadPartInputBuilder { /* private fields */ }

A builder for UploadPartInput.

Implementations

impl UploadPartInputBuilder

pub fn body(self, input: ByteStream) -> UploadPartInputBuilder

Object data.

pub fn set_body(self, input: Option<ByteStream>) -> UploadPartInputBuilder

Object data.

pub fn get_body(&self) -> &Option<ByteStream>

Object data.

pub fn bucket(self, input: impl Into<String>) -> UploadPartInputBuilder

The name of the bucket to which the multipart upload was initiated.

When using this action with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using access points in the Amazon S3 User Guide.

When you use this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com. When you use this action with S3 on Outposts through the Amazon Web Services SDKs, you provide the Outposts access point ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see What is S3 on Outposts? in the Amazon S3 User Guide.

pub fn set_bucket(self, input: Option<String>) -> UploadPartInputBuilder

The name of the bucket to which the multipart upload was initiated.

When using this action with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using access points in the Amazon S3 User Guide.

When you use this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com. When you use this action with S3 on Outposts through the Amazon Web Services SDKs, you provide the Outposts access point ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see What is S3 on Outposts? in the Amazon S3 User Guide.

pub fn get_bucket(&self) -> &Option<String>

The name of the bucket to which the multipart upload was initiated.

When using this action with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using access points in the Amazon S3 User Guide.

When you use this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com. When you use this action with S3 on Outposts through the Amazon Web Services SDKs, you provide the Outposts access point ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see What is S3 on Outposts? in the Amazon S3 User Guide.

pub fn content_length(self, input: i64) -> UploadPartInputBuilder

Size of the body in bytes. This parameter is useful when the size of the body cannot be determined automatically.

pub fn set_content_length(self, input: Option<i64>) -> UploadPartInputBuilder

Size of the body in bytes. This parameter is useful when the size of the body cannot be determined automatically.

pub fn get_content_length(&self) -> &Option<i64>

Size of the body in bytes. This parameter is useful when the size of the body cannot be determined automatically.

pub fn content_md5(self, input: impl Into<String>) -> UploadPartInputBuilder

The base64-encoded 128-bit MD5 digest of the part data. This parameter is auto-populated when using the command from the CLI. This parameter is required if object lock parameters are specified.

pub fn set_content_md5(self, input: Option<String>) -> UploadPartInputBuilder

The base64-encoded 128-bit MD5 digest of the part data. This parameter is auto-populated when using the command from the CLI. This parameter is required if object lock parameters are specified.

pub fn get_content_md5(&self) -> &Option<String>

The base64-encoded 128-bit MD5 digest of the part data. This parameter is auto-populated when using the command from the CLI. This parameter is required if object lock parameters are specified.

pub fn checksum_algorithm( self, input: ChecksumAlgorithm ) -> UploadPartInputBuilder

Indicates the algorithm used to create the checksum for the object when using the SDK. This header will not provide any additional functionality if not using the SDK. When sending this header, there must be a corresponding x-amz-checksum or x-amz-trailer header sent. Otherwise, Amazon S3 fails the request with the HTTP status code 400 Bad Request. For more information, see Checking object integrity in the Amazon S3 User Guide.

If you provide an individual checksum, Amazon S3 ignores any provided ChecksumAlgorithm parameter.

This checksum algorithm must be the same for all parts and it match the checksum value supplied in the CreateMultipartUpload request.

pub fn set_checksum_algorithm( self, input: Option<ChecksumAlgorithm> ) -> UploadPartInputBuilder

Indicates the algorithm used to create the checksum for the object when using the SDK. This header will not provide any additional functionality if not using the SDK. When sending this header, there must be a corresponding x-amz-checksum or x-amz-trailer header sent. Otherwise, Amazon S3 fails the request with the HTTP status code 400 Bad Request. For more information, see Checking object integrity in the Amazon S3 User Guide.

If you provide an individual checksum, Amazon S3 ignores any provided ChecksumAlgorithm parameter.

This checksum algorithm must be the same for all parts and it match the checksum value supplied in the CreateMultipartUpload request.

pub fn get_checksum_algorithm(&self) -> &Option<ChecksumAlgorithm>

Indicates the algorithm used to create the checksum for the object when using the SDK. This header will not provide any additional functionality if not using the SDK. When sending this header, there must be a corresponding x-amz-checksum or x-amz-trailer header sent. Otherwise, Amazon S3 fails the request with the HTTP status code 400 Bad Request. For more information, see Checking object integrity in the Amazon S3 User Guide.

If you provide an individual checksum, Amazon S3 ignores any provided ChecksumAlgorithm parameter.

This checksum algorithm must be the same for all parts and it match the checksum value supplied in the CreateMultipartUpload request.

pub fn checksum_crc32(self, input: impl Into<String>) -> UploadPartInputBuilder

This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 32-bit CRC32 checksum of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.

pub fn set_checksum_crc32(self, input: Option<String>) -> UploadPartInputBuilder

This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 32-bit CRC32 checksum of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.

pub fn get_checksum_crc32(&self) -> &Option<String>

This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 32-bit CRC32 checksum of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.

pub fn checksum_crc32_c( self, input: impl Into<String> ) -> UploadPartInputBuilder

This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 32-bit CRC32C checksum of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.

pub fn set_checksum_crc32_c( self, input: Option<String> ) -> UploadPartInputBuilder

This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 32-bit CRC32C checksum of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.

pub fn get_checksum_crc32_c(&self) -> &Option<String>

This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 32-bit CRC32C checksum of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.

pub fn checksum_sha1(self, input: impl Into<String>) -> UploadPartInputBuilder

This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 160-bit SHA-1 digest of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.

pub fn set_checksum_sha1(self, input: Option<String>) -> UploadPartInputBuilder

This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 160-bit SHA-1 digest of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.

pub fn get_checksum_sha1(&self) -> &Option<String>

This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 160-bit SHA-1 digest of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.

pub fn checksum_sha256(self, input: impl Into<String>) -> UploadPartInputBuilder

This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 256-bit SHA-256 digest of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.

pub fn set_checksum_sha256( self, input: Option<String> ) -> UploadPartInputBuilder

This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 256-bit SHA-256 digest of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.

pub fn get_checksum_sha256(&self) -> &Option<String>

This header can be used as a data integrity check to verify that the data received is the same data that was originally sent. This header specifies the base64-encoded, 256-bit SHA-256 digest of the object. For more information, see Checking object integrity in the Amazon S3 User Guide.

pub fn key(self, input: impl Into<String>) -> UploadPartInputBuilder

Object key for which the multipart upload was initiated.

pub fn set_key(self, input: Option<String>) -> UploadPartInputBuilder

Object key for which the multipart upload was initiated.

pub fn get_key(&self) -> &Option<String>

Object key for which the multipart upload was initiated.

pub fn part_number(self, input: i32) -> UploadPartInputBuilder

Part number of part being uploaded. This is a positive integer between 1 and 10,000.

pub fn set_part_number(self, input: Option<i32>) -> UploadPartInputBuilder

Part number of part being uploaded. This is a positive integer between 1 and 10,000.

pub fn get_part_number(&self) -> &Option<i32>

Part number of part being uploaded. This is a positive integer between 1 and 10,000.

pub fn upload_id(self, input: impl Into<String>) -> UploadPartInputBuilder

Upload ID identifying the multipart upload whose part is being uploaded.

pub fn set_upload_id(self, input: Option<String>) -> UploadPartInputBuilder

Upload ID identifying the multipart upload whose part is being uploaded.

pub fn get_upload_id(&self) -> &Option<String>

Upload ID identifying the multipart upload whose part is being uploaded.

pub fn sse_customer_algorithm( self, input: impl Into<String> ) -> UploadPartInputBuilder

Specifies the algorithm to use to when encrypting the object (for example, AES256).

pub fn set_sse_customer_algorithm( self, input: Option<String> ) -> UploadPartInputBuilder

Specifies the algorithm to use to when encrypting the object (for example, AES256).

pub fn get_sse_customer_algorithm(&self) -> &Option<String>

Specifies the algorithm to use to when encrypting the object (for example, AES256).

pub fn sse_customer_key( self, input: impl Into<String> ) -> UploadPartInputBuilder

Specifies the customer-provided encryption key for Amazon S3 to use in encrypting data. This value is used to store the object and then it is discarded; Amazon S3 does not store the encryption key. The key must be appropriate for use with the algorithm specified in the x-amz-server-side-encryption-customer-algorithm header. This must be the same encryption key specified in the initiate multipart upload request.

pub fn set_sse_customer_key( self, input: Option<String> ) -> UploadPartInputBuilder

Specifies the customer-provided encryption key for Amazon S3 to use in encrypting data. This value is used to store the object and then it is discarded; Amazon S3 does not store the encryption key. The key must be appropriate for use with the algorithm specified in the x-amz-server-side-encryption-customer-algorithm header. This must be the same encryption key specified in the initiate multipart upload request.

pub fn get_sse_customer_key(&self) -> &Option<String>

Specifies the customer-provided encryption key for Amazon S3 to use in encrypting data. This value is used to store the object and then it is discarded; Amazon S3 does not store the encryption key. The key must be appropriate for use with the algorithm specified in the x-amz-server-side-encryption-customer-algorithm header. This must be the same encryption key specified in the initiate multipart upload request.

pub fn sse_customer_key_md5( self, input: impl Into<String> ) -> UploadPartInputBuilder

Specifies the 128-bit MD5 digest of the encryption key according to RFC 1321. Amazon S3 uses this header for a message integrity check to ensure that the encryption key was transmitted without error.

pub fn set_sse_customer_key_md5( self, input: Option<String> ) -> UploadPartInputBuilder

Specifies the 128-bit MD5 digest of the encryption key according to RFC 1321. Amazon S3 uses this header for a message integrity check to ensure that the encryption key was transmitted without error.

pub fn get_sse_customer_key_md5(&self) -> &Option<String>

Specifies the 128-bit MD5 digest of the encryption key according to RFC 1321. Amazon S3 uses this header for a message integrity check to ensure that the encryption key was transmitted without error.

pub fn request_payer(self, input: RequestPayer) -> UploadPartInputBuilder

Confirms that the requester knows that they will be charged for the request. Bucket owners need not specify this parameter in their requests. If either the source or destination Amazon S3 bucket has Requester Pays enabled, the requester will pay for corresponding charges to copy the object. For information about downloading objects from Requester Pays buckets, see Downloading Objects in Requester Pays Buckets in the Amazon S3 User Guide.

pub fn set_request_payer( self, input: Option<RequestPayer> ) -> UploadPartInputBuilder

Confirms that the requester knows that they will be charged for the request. Bucket owners need not specify this parameter in their requests. If either the source or destination Amazon S3 bucket has Requester Pays enabled, the requester will pay for corresponding charges to copy the object. For information about downloading objects from Requester Pays buckets, see Downloading Objects in Requester Pays Buckets in the Amazon S3 User Guide.

pub fn get_request_payer(&self) -> &Option<RequestPayer>

Confirms that the requester knows that they will be charged for the request. Bucket owners need not specify this parameter in their requests. If either the source or destination Amazon S3 bucket has Requester Pays enabled, the requester will pay for corresponding charges to copy the object. For information about downloading objects from Requester Pays buckets, see Downloading Objects in Requester Pays Buckets in the Amazon S3 User Guide.

pub fn expected_bucket_owner( self, input: impl Into<String> ) -> UploadPartInputBuilder

The account ID of the expected bucket owner. If the bucket is owned by a different account, the request fails with the HTTP status code 403 Forbidden (access denied).

pub fn set_expected_bucket_owner( self, input: Option<String> ) -> UploadPartInputBuilder

The account ID of the expected bucket owner. If the bucket is owned by a different account, the request fails with the HTTP status code 403 Forbidden (access denied).

pub fn get_expected_bucket_owner(&self) -> &Option<String>

The account ID of the expected bucket owner. If the bucket is owned by a different account, the request fails with the HTTP status code 403 Forbidden (access denied).

pub fn build(self) -> Result<UploadPartInput, BuildError>

Consumes the builder and constructs a UploadPartInput.

impl UploadPartInputBuilder

pub async fn send_with( self, client: &Client ) -> Result<UploadPartOutput, SdkError<UploadPartError, Response<SdkBody>>>

Sends a request with this input using the given client.

Trait Implementations

impl Debug for UploadPartInputBuilder

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl Default for UploadPartInputBuilder

fn default() -> UploadPartInputBuilder

Returns the “default value” for a type.